|
Cazam
Admin
| Posts: 191 |  |
 |
Re:Router based on an ALIX board - limited range |
- 2010/06/01 08:17 |
|
#1 |
Hey Amason,
The DCMA-81 is a 50mw card where as your WG602 had 70mw. In an indoor situation where you are trying to punch through walls this may make all the difference. That being said I would have thought that even with a 50mw card you should get some signal.
I could not access that link you posted. How are you setting your tx power settings? are you able to pm me your config file for the wireless side of your setup?
one quick and cheap think you could try if everything else is setup fine is make up a reflector for your antenna.
see here http://binarywolf.com/249/diy-parabolic-reflector.htm
if your looking to cover an area that is mostly in one direction from your router then this is a good idea any way
let me know how you go
Zac
Bathurst Wireless Project Admin |
