Loading... Please wait...
Bathurst Wireless Forums  


Boardwalk :: Forum List Bathurst Wireless Bathurst Wireless Discussion
Cazam
Admin

Posts: 191
graph
 
Click here to see the profile of this user
BXwifiAP01 Rebourne
- 2008/02/14 01:59
#1
well it has been almost 6 months since AP01 has been operational. Now finaly it looks like I have the time and equipment to get it back up. It will be connecting to AP02 hopefully with a 5.8ghz link and to AP03 with a 2.4ghz link and will have a 2.4ghz waveguide pointed towards town. it is now located in lower Rocket st in the block between Havannah st and Lambert st. once up I hope it will allow AP01 and AP03 to usable access points. AP03 should be a great ap when it was up for "testing" a few months ago I was able to pick it up from a very large area of town.

so anyone who has been wanting to connect to the network now is the time to speak up so that we can help. I personaly will be making more time for testing and helping people connect.

Zac
Bathurst Wireless Project Admin
TOP   | | The administrator has disabled public write access.
neobyte
WiFi Extraordinaire
User

Posts: 106
graphgraph
 
Click here to see the profile of this user
Re:BXwifiAP01 Rebourne
- 2008/02/21 01:34
#2
so anyone who has been wanting to connect to the network now is the time to speak up so that we can help.

Well I'm up for a new connection at my new place in Wyndradyne opposite the RTA near the hill access to AP04 I believe.

Also if anyone needs any help setting up I've got some basic test gear with usb wificard with external connections that will fit most antennas.

The map needs updating.
TOP   | | The administrator has disabled public write access.
Cazam
Admin

Posts: 191
graph
 
Click here to see the profile of this user
Re:BXwifiAP01 Rebourne
- 2008/02/21 03:47
#3
where abouts are you Neobyte? I know I can connet with an internal laptop card sitting in his living room. ap04 has very good coverage.

what usb card did you get I grabed one of the cheapies from ebay $25 delivered. it has an sma and works in linux very simple little thing based on the zydas chip
Bathurst Wireless Project Admin
TOP   | | The administrator has disabled public write access.
neobyte
WiFi Extraordinaire
User

Posts: 106
graphgraph
 
Click here to see the profile of this user
Re:BXwifiAP01 Rebourne
- 2008/02/21 04:12
#4
where abouts are you Neobyte?

Near Burgess Place

I notice at the end of Lavelle Street someone has a link to AP04.

what usb card did you get I grabed one of the cheapies from ebay $25

I got the Edimax version with SMA socked works well.

I think it was $55 delivered.
TOP   | | The administrator has disabled public write access.
Cazam
Admin

Posts: 191
graph
 
Click here to see the profile of this user
Re:BXwifiAP01 Rebourne
- 2008/05/23 15:24
#5
It is a good day for Bathurst wireless

Thats right, the one, the only, AP01 is back up and operational.

It is running a homemade omni which is proving to be quite the antenna with the abillity to reach out as far as Kelso.

It is also quick one client is able to get over 2mbs that 2 megabytes every second.

It is linked into ap02 with a 5.8ghz backbone which still needs a little tweeking. Hopfully over the next few months we will see speed of up to 2mbs from end to end on the network.

But for now hiphop hooray


Cazam
Bathurst Wireless Project Admin
TOP   | | The administrator has disabled public write access.
XtremeX
Admin

Posts: 26
graphgraph
 
Click here to see the profile of this user
Re:BXwifiAP01 Rebourne
- 2008/05/24 08:41
#6
Wahoo!!!!


Great new indeed
Behind every little problem there's a larger problem, waiting for the little problem to get out of the way. When I do figure out the problem, my mind is like lightning, one brilliant flash then it is gone!
TOP   | | The administrator has disabled public write access.
Boardwalk :: Forum List Bathurst Wireless Bathurst Wireless Discussion

Joomlaboard Forum Component 1.1.2 Stable
Two Shoes M-Factory